Nitro Snowboard Boots - Select Tls Plus Charcoal-Black

Snowboard boots - Nitro Select Tls Plus Charcoal-Black

Select TLS is one of Nitro's stiffest boots, perfect for the rider who have high demands on comfort, response and above all, support!

Nitro has put a lot of focus on comfort and performance with distinct cushions in the heel for optimal heel grip. The Vibram outsole with D3O & AIR Dampening makes it extremely shock-absorbing and durable with great grip on slippery surfaces. Select TLS has a reinforced shell (Armored Shell) , along the back and side of the boot so that the stiffness of the boot is retained while minimizing the chances of it stretching and losing the heel grip. It comes with an extra tongue (Power Tongue Stiffener) that sits inside the TLS quick lace for a stiffer flex and is also removable if you prefer a slightly softer flex. Select TLS has the Cloud 9 Liner with optimal fit from day one. The Liner can also be heat molded and is equipped with a Triple Densitity Ortholite Footbed that absorbs both shock and drives away moisture. The quick lace systems (TLS & ILS) allows you to sit perfectly in the boots without pressure points, while at the same time it is easy to get in and out of the boot without much effort. Covering the lacing, there is a Speed Gaiter that keeps the snow out and your feet dry.

The fit and comfort of boots from Nitro are difficult to beat. Nitro Select is a snowboarding boot with TLS quick lacing and "Nitro-fit". You can read more about the technology below.

Read our Buying guide for snowboard boots before picking your size, in order to find the perfect fit.

Watch the video below where Nitro presents Select TLS.

Respons Rating: 9-10/10
Comfort Rating: 8-9/10

Rider
Select TLS is for those who is riding aggressiv and powerful but still wants comfort. It is a snowboard boot that lasts a long time and thus suits those who rides a lot.

Rider Level:
Advanced

Liner:
Cloud 9 Liner
Our flagship liner ́s ultra-lightweight pre-molded Thermacell material creates a straight out of the box fit with unstoppable comfort. Our signature latex heel pads provide lifetime heel fit, while the clutch tongue makes boot entry and exit easier. A triple-density footbed for maximum cushioning and comfort, while the Re/Lace Liner Locker will allow for quick re-tightens easily and give you the perfect foothold. Heat moldable.
 
Lacing systems:
TLS Powercord Lacing System (Shell)
Nitro leading the pack with the TLS Powercord lacing system: Easy lace engagement and release, combined with the low abrasion of our Dyneema® laces are the key factors of this highly reliable zonal lacing system. At the same time, the TLS Powercord features compact size and low weight while maintaining the reliability proven by tens of thousands of days on the mountain. Even though rarely needed, servicing and replacement of all parts including the lace are easier than with any other system on the market. Even using a standard lace if you‘re in a pinch is an option only available on Nitro‘s TLS boots.
Easy-entry handle storage pockets as well as our Bail Out system for easier entry and exit round off the most developed dual lacing system on the market.
ILS Lacing System (Liner)
Our ILS system features a lacing harness firmly connected to the boot shell. This harness snugly wraps around the liner, securing it in the shell and providing precise lacing and fit. Our engineered ILS laces provide less friction and a Dyneema® core for added strength.
Re/Lace Liner Locker
Another innovation from our friendly R&D department at Nitro: The RE/LACE Liner Locker provides easy adjustability of your inner boot lacing when your boot shell is already tied, by just pulling up on the lace handle. This allows you to (re)tighten your liner and foothold throughout the day (wherever you may find yourself on the mountain) without having to untie your boot.
Bail Out System
Designed to make unlacing the TLS system even easier. This pull tab that is placed in the middle of the TLS lacing system on the outside of the boot allows for effortless unlacing and recording breaking speeds for taking your boots off.

Construction:
VIBRAM EcoStep Yttersula:
Vibram grip and traction and an Eco-friendly approach: here is the new sole of NITRO .... made of Vibram® ECOSTEPTM Compound, an eco-friendly recycled rubber compound developed by Vibram® and made up to 50% of recycled rubber. The rubber scrap generated by Vibram’s production process is recycled in order to produce Vibram® Ecostep compound. It’s a High-quality compound formulation, which offers a very good Vibram grip and traction on snow while preserving the environment through the waste reduction.
Speed Gaiter
A zippered gusset to keep all the elements on the outside and your feet warm and dry.
AIR Dampening
Our trusted AIR suspension technology is now featured on even more models. The best shock absorbing technology on the planet sucks up hard landings and keeps your heels from getting bruised. This noticeable difference in ride and comfort does not compromise response or control.
D30 Technology
D3O® is a smart material that moves slowly and increases comfort when in a normal state, but when shock or impact is increased the materials lock together to absorb and disperse energy created upon impact, before instantly returning to its flexible state. What this means is that the material increases the overall comfort by absorbing impact from deep landings or choppy snow conditions – allowing you to go faster and deeper all day!
Therminator Shield
This thermal layer between sole and liner will reflect your body heat and keep your feet warm all day.
Armored Shell
To give our Bianca, Select, and Select Clicker® boots more support and response, we have designed an internal molded shell. This anatomically shaped and 3D molded piece wraps around the heel and the lateral /medial side of the foot which increases heel fit, shell stiffness and durability.
Flex Link
A flexible panel at the ankle between the upper and lower shell ensures an even flexing, responsive boot without the bulk.
45° Laceglider
This precision-molded low-friction plastic insert is positioned at the crucial 45° lacing position in the ankle area. It drastically reduces lace friction and makes tying up your TLS system even easier.
Auto-Power Strap
An adjustable power strap located on the top part of the boot shell, that can be easily adjusted, opened and closed through a simple belt ring design. If you want a more responsive fit from the top of your boot than you tighten it if you want a looser fit or feel than you can loosen it or remove the power-strap.
Internal Ankle Support
An anatomically shaped molded plate distributes lace pressure over the instep/ankle area: More comfort and a better, more precise fit.
Power Tongue Stiffener
For those looking for adjustable stiffness throughout the day or season, you can use our removable tongue stiffener to change between premium precision or more of a relaxed feel. From the steep and deep to the groomers, you can customize your boot feel perfect for your style.
Ortholite Footbeds
Together with OrthoLite®, the World’s Leading Supplier of Open-Cell Foam Insole Technology, we have developed footbeds in dual and triple density versions for different levels of support and comfort: OrthoLite® compresses less than 5% with excellent levels of shock absorption and energy return. Fit and comfort inside the boot will remain consistent for the life of the OrthoLite® product.
The unique open cell structure of OrthoLite® also creates a moisture management system inside the boot by moving moisture away from the foot leaving your feet drier. When the foot is removed from the shoe any remaining moisture dries very quickly due to the airflow allowed by the open cell network in the foam. OrthoLite® contains a patented anti-microbial formulation to fight fungus, bacteria, and odor. The biocide is added during formulation so that it is linked to the foam and will not wear off or lose effectiveness over time. The Aegis anti-microbial treatment is EPA and FDA approved. OrthoLite® is extremely lightweight providing optimum performance and without adding excess weight to the boot. OrthoLite® is completely washable and will not hydrolyze. Just throw them in your washing machine and they come out like new.