Nitro Snowboard Set - Alternator 157 + Team Ultra Black M

Snowboard Set - Nitro Alternator 157 + Team Ultra Black M

Snowboard - Nitro Alternator 157
The Alternator is a very quick and stabile snowboard for long and lovely runs all over the mountain. It’s the perfect boards for long carves, powder, side hits or dropping cliffs. The Alternator is an directional snowboard with a Trüe Camber profile which gives it a lof of pop, response and stability at high speeds. The Dual Degressive sidecut and the Powerlite Core gives a lot of edge control and makes initiating turn very easy.The Alternator is a combination of the Nitro Banker, Mountain and Team. In other words it’s a very fast, stabile and versatile snowboard with great float in powder and a lot of pop.

In North America it’s trendy to ride directional boards for freestyle riding. The Alternator is the team favorite in that regard.

The board is waxed and tuned at the factory, ready for the mountain!

Watch the video below where Nitro presents the Alternator.

Flex: All Terrain 7/10
Our most versatile flex pattern, combining Nitro’s signature pop with smooth response, allowing you to tear up the entire mountain. Flex 1/10 is soft and playful whilst 10/10 is stiff and responsive.

Rider:
Buy the Alternator if you’re looking for a stabile board for long carves, deep powder and a lot of airtime.

Freeride: 9/10
All Mountain: 10/10
Freestyle: 6/10

Rider Level:
Intermediate -Advanced

Shape:
Directional: Longer nose and a reinforced tail to make it easier to initiate turns.
Dual Degressive Sidecut: This sidecut blends a smaller radius in the center with two larger ones in the tip and tail, making it loose and playful. Nitro ́s most forgiving sidecut.

Profile:
Trüe Camber: Trüe Camber is good old standard camber, which provides the stability, and pop many shreds can ́t live without. The amount of snap and support you get from a cambered board is unrivalled by any other camber design. Our Trüe Camber varies between board models because each board is specifically designed for a certain terrain or type of riding, for example the Trüe Camber in our Pantera has a larger height for maximum response, while the Trüe Camber in our freestyle boards are lower to provide you with a more freestyle friendly flex, without losing the support and trust you need for stomping landings. Camber is Camber there is no point in over complicating it!

Construction:
Powerlite core: Our Powercore uses tip-to-tail poplar wood, providing lightweight strength and the perfect blend of flex, response and feel.
Bi-Lite Laminates: Our rider-trusted Bi-Lite Laminates are engineered for unrivalled strength, powerful style and refined board- feel.
Carbon Tape: Carbon reinforcement fibers are ultra-strong yet lightweight. Tip-to-tail stringers transfer rider’s input to help you drive your board and stay in control.
Reflex Core Profile: A thinner core profile between your feet improves handling and increases torsional flex, allowing you to steer your board through a turn with ease.
Sintered Speed Formula II Base: Rocket science put to work! A nanotech wax formula deeply infused into our sintered base material makes the base surface lightning fast in all snow conditions. Highly tuned yet extremely durable, SPEED FORMULA II Base technology is exclusively featured on Nitro high-end boards.
Wax: All NITRO boards are factory-tuned with Kandahars 100% Natural Speed Wax, a fully Bio-degradable wax made of renewable resources.
 
Sustainability:
Water-based incs for over 70% of all topsheets
Wood from responsible sources (FSC certified)
All edges are made of 50% recycled steel
Over 85% of all running bases are made using recycled raw material
The board factory is powered 100% by solar power
 
Functioner & Specifications:
- Inserts: 2x4
- CORE: Powerlite core + Bi-Lite Laminates + carbon tape + Reflex Core Profile
- BASE: Sintered Speed Formula II Base
- SHAPE: Directional + Dual degressive
- Setback: -15mm
- Profil: Trüe Camber
- FLEX: All Terrain 7/10
- Mid wide width
- Sidecut: 10.8/6.8/ 10.8m
- Length: 157cm
- Running Length: 1110mm
- Waist width: 254mm
- Recommened rider weight: 60-80 kg

Snowboard binding - Nitro Team Ultra Black M
The Team binding is our favourite and is praised worldwide. It is the most versatile All Mountain binding in Nitro's range. The base plate (Stealth) is lightweight and equipped with air dampening (Air Dampening) and have been canted 3° for a more ergonomic position so that you can ride longer. The asymmetric highback (JET) provides a perfect combination of support and response for all types of riding. The ratchets have been reinforced with steel cables to withstand wear and tear. The Team have a molded ankle strap (3D Optiframe Ankle Strap) for a snug fit without pressure points. The toe strap (Übergrip PRO Toe Strap) is a super lightweight 3D injection molded strap with extra grip on the inside for an extra snug fit around the boot.

We recommend trying to match the Respons Rating/Flex on snowboard, binding and boots to get the best possible synergy between your equipment. Ask us if you need help!

Watch the video below where Nitro presents Team.

Rider:
Team is the versatile all mountain binding. It’s the perfect binding for the rider who rides all over the mountain.

Rider level:
Average-Advanced

Respons Rating: 7/10
Comfort Rating: 9/10

Specification:
Nitro Mini Disc 2x4 & Burton Channel – Natural flex
Equipped with Nitro's mini disk which leaves more room for dampening and it’s compatible with both 2x4 and Burton Channel. A smaller disk reduce the mounting surface, which minimize the bindings effect on the boards flex.
AIR – Absorbs shocks
Air dampening in the heel to absorb shocks when landing. Perfect dampening even if it’s cold temperatures.
Reinforced ratchets and connectors – Reliable
The ratchets and connectors are infused with a steel wire to withstand high pressure and make sure that you will always be able to ride down to the valley.
Jet Highback – High response at every direction
The Jet highback is Asymetrik and offers a lot of response both vertically and horizontally. The inside of the highback is covered with EVA for a snug fit that will secure optimal grip in the heel. The forward lean is adjusted with the help of a screwdriver to ensure it can’t break.
Stealth Air Baseplate – Quicker response and adjustable
Stiff and responsive baseplate. The size of the baseplate can be adjusted with the help of a screwdriver.
3° canted baseplate – Comfortable riding stance
The baseplate is canted 3° and will reduce the pressure on your knees and allows you to ride longer.
3D Optiframe Ankle strap – Comfort
Molded ankle strap for a snug fit without pressure points.
Übergrip PRO Toe Strap – Optimal grip
The Übergrip Pro toe strap is characterized by its lightweight, 3D-injected molded construction, which incorporates a grip pad on the interior to guarantee an optimal level of secure fitting, grip, and support.
Toolless adjustments – Easy to get the perfect fit
You can adjust the size of the straps and the forward lean without tools.
Board Saver Technology – Less pressure on the board
The bottom of the binding is have softer edges and made out of softer materials to reduce the pressure on the board and allow the board to flex more natural.

Size chart:
Medium: US 7-10,5 / MP 25,0-28,5 / EU 38,5-43,5