Nitro Snowboard Set - Magnum 167 (Wide) + Nidecker Supermatic OG XL

Snowboard Set - Nitro Magnum 169 (Wide) + Nidecker Supermatic OG XL

Snowboard - Nitro Magnum 167 (Wide)
The Magnum is the ultimate all-round board for people with larger feet (EUR 44+). The Nitro Magnum is not a "regular" snowboard that is produced in a wide-model but instead it is specifically designed to fit larger boots. The Magnum is a wide-board which gives the same riding feeling as a standard waisted snowboard.

The construction and shape makes Magnum perform all over the mountain and it’s designed to carve on the piste, float in the powder or ride through the park. The combination of Cam-out Camber, Power Pods and the Reflex Core Profile makes it snappy from heel to toe edge while providing proper pressure and control during the turns. The sintered base also gives the board extremely good gliding properties and the ultra-light Powerlite core gives the snowboard both pop and strength.

The board is waxed and tuned at the factory, ready for the mountain!

Watch the video below where Nitro presents the Magnum.

Rider:
All Mountain - This is the ALL Mountain board for people with big feet (US10.5 +). The Magnum is the snowboard that really feels like a board with a standard waist size. With a Nitro Magnum under your feet you can dominate everywhere on the mountain.

Freeride: 9/10
All Mountain: 10/10
Freestyle: 4/10
 
Flex: Mountain 7/10
With maximum response and drive for fast, all-mountain riding, this snappy flex pattern creates powerful boards for powerful riders.Skalan är uppbyggd på principen att 1 är "Mjuk och Lekfull" medan 10 är "Hård och Responsiv".
 
Rider Level:
Intermediate-Advanced
 
Shape:
Directional: Longer nose and a reinforced tail to make it easier to initiate turns.
Dual Degressive Sidecut: This sidecut blends a smaller radius in the center with two larger ones in the tip and tail, making it loose and playful. Nitro ́s most forgiving sidecut.
 
Profile:
Cam-Out Camber: Our Cam-Out Camber is basically a Trüe Camber with early and smooth transitions into tip and tail. The result is a fun and responsive board that turns on the spot and is forgiving, even after that 713.5° landing!
 
Construction:
Powerlite core: Our Powercore uses tip-to-tail poplar wood, providing lightweight strength and the perfect blend of flex, response and feel.
Bi-Lite Laminates: Our rider-trusted Bi-Lite Laminates are engineered for unrivalled strength, powerful style and refined board- feel.
Standard Core Profile: Even flex and control
Sintered Speed Formula II Base: Rocket science put to work! A nanotech wax formula deeply infused into our sintered base material makes the base surface lightning fast in all snow conditions. Highly tuned yet extremely durable, SPEED FORMULA II Base technology is exclusively featured on Nitro high-end boards.
Wax: All NITRO boards are factory-tuned with Kandahars 100% Natural Speed Wax, a fully Bio-degradable wax made of renewable resources.
Power Pods: Overlaying a tighter sidecut radius in the center of the board with a larger one towards tip and tail is creating our exclusive POWERPODS which have two amazing effects: On one hand, there is extended board width under the bindings, resulting in additional edge control, especially on hard and icy surfaces as well as simply less toe and heel drag for larger boots and flatter stance angles. On the other hand, our POWERPODS make the board super reactive and fast turning once it’s put on edge – while keeping it easy to control if ridden with less dynamics.

Sustainability:
Certified CO2 Neutral Life Cycle
Water-based incs for over 70% of all topsheets
Wood from responsible sources (FSC certified)
All edges are made of 50% recycled steel
Over 85% of all running bases are made using recycled raw material
The board factory is powered 100% by solar power
 
Specifications:
- Hole System: 2x4
- CORE: Powerlite Core + Bi-Lite Laminates + Reflex Core Profilee
- BASE: Sintered Speed Formula II Base + Power Pods
- SHAPE: Directional + Dual Degressive Sidecut
- Setback: -15mm
- Profile: Cam-out Camber
- FLEX: Mountain 7/10
- Wide Width
- Sidecut: 7.5/4.8m
- Length: 167cm
- Running Length: 1150mm
- Waist Width: 272mm
- Recommended weight: 75+kg

Snowboard Binding – Nidecker Supermatic OG Step In Black XL
Nidecker Supermatic OG is a Step In binding that has largely eliminated all the drawbacks of traditional Step In bindings.  Supermatic is incredibly fast and easy to use while fitting regular snowboard boots perfectly. It works excellently in powder, is comfortable, and high-performing.

The reason to choose a Step In binding is that it's much quicker to strap in, and it's straightforward. To strap into the Supermatic binding, you simply insert your foot into the binding and push down. To exit the binding, you pull on a lever (Release Lever) and remove your foot. You don't need special boots to use Nidecker Supermatic; you can use regular snowboard boots. It's really easy to get in and out of Supermatic. Learn more below about all the features that make it so easy: Asym Hadron Reclining Highback, Hybrid ExoFrame Powerstrap, Active Strap, Heelcup Roller, Heel Pedal, Release Lever, and Slip-N-Grip Plate.

Supermatic has a fully covered strap (Hybrid Exoframe Powerstrap) that distributes pressure evenly over the foot and is comfortable. You can adjust the strap's size to fit your own foot perfectly. If you get stuck in deep powder somewhere, you can also strap in like a traditional snowboard binding thanks to LSR-Buckles.

Supermatic has quick and robust horizontally responsiveness while providing a bit more lateral flex. The footbed is padded to reduce vibrations and prevent you from sliding around in the binding. If you're looking for a snowboard binding that's as easy and fast to use as a skier's binding, you should check out Nidecker Supermatic.

We recommend trying to match the stiffness (Respons Rating/Flex) of your snowboard, binding, and boots to get the best possible synergy between your equipment. Ask us if you need help!

Watch the video below where Nidecker presents Supermatic.

Rider:
Supermatic is a binding for those who want to quickly and easily strap into their snowboard. It has quick and robust responsiveness while being very comfortable on the foot.

All Mountain: 10/10
Powder: 10/10
Park: 5/10

Recommended Level:
Intermediate-Advanced

Respons Rating: 8/10

Technical Information:
2.5° Canted Footbed: The baseplate is canted 2.5° for a more ergonomic riding position for longer days on the slopes.
Multidisc (2x4, 4x4, 3D, Channel): The binding comes with a disc that is compatible with 2x4, 4x4, 3D, and Burton Channel.
Asym Hadron Reclining Highback: The Supermatic's highback is a folding and asymmetrically molded nylon highback. The highback folds down completely, creating the fastest automatic step-in system where it's easy to insert your foot. The highback provides excellent support and comfort.
Hybrid ExoFrame PowerStrap: Supermatic's straps are designed to feel like two straps, even though they are connected. Being connected makes it easier to step in and out of the binding while transferring power more efficiently without needing to tighten the straps too much.
Active Strap: To make it even easier to step in and out of Supermatic, it uses the Active Strap. When you fold down the highback, the strap also moves up, making it easier to get in and out of the binding.
LSR Buckles: Lockable buckles that can be set to their own perfect setting and never need to be adjusted again, or they can be used as regular snowboard buckles if, for example, you get stuck in very deep snow.
Heelcup Roller: Under the highback, there is a roller that facilitates getting in and out of the binding and guides the boot correctly.
Heel Pedal: In the heel, there is a Heel Pedal, a locking mechanism that is pressed down by your snowboard boots and locks the binding to the ride mode. Heel Pedal is self-cleaning so that snow doesn't prevent the binding from locking. There are three locking positions, which you can hear through clicking sounds.
Release Lever: To exit Supermatic, you press the lever and pull your foot out of the binding.
Slip-N-Grip Plate: Slip-N-Grip Plate is a glossy and slippery plate on the footbed that makes it easier to get in and out of the binding.

Fits boot sizes:
XL: US 11-13 / MP 29-31 / EU 44,5-47