Nitro Snowboard Victoria 152

Snowboard - Nitro Victoria 152

The Victoria is an All Mountain board for those who have high standards for their equipment and like to ride fast. The Victoria will give you full control over the whole mountain. The Koroyd core makes the board very lightweight, but at the same time it retains its flex and allows for maximum response at high speeds. The Sintered Speed Formula II base provides the ultimate gliding experience that should be standard on a board of this caliber. The Victoria will strengthen your confidence all over the mountain.

The board is waxed and tuned at the factory, ready for the mountain!

Watch the video below where Nitro presents the Victoria.

Rider:
The Victoria is a snowboard for anyone who rides fast and aggressively everywhere on the mountain. It is a very fast and stable snowboard and with a lot of pop.

Freeride: 8/10
All Mountain: 10/10
Freestyle: 8/10
 
Flex: Mountain 7/10
With maximum response and drive for fast, all-mountain riding, this snappy flex pattern creates powerful boards for powerful riders.Skalan är uppbyggd på principen att 1 är "Mjuk och Lekfull" medan 10 är "Hård och Responsiv".

Rider Level:
Advanced

Shape:
Directional: Longer nose and a reinforced tail to make it easier to initiate turns.
PROGRESSIVE SIDECUT: A larger radius in the front, blended into a tighter one towards the tail: The progressive sidecut makes accelerating out of turns a breeze, while maintaining a catch-free nose area.

Profile:
Trüe Camber: Trüe Camber is good old standard camber, which provides the stability, and pop many shreds can ́t live without. The amount of snap and support you get from a cambered board is unrivalled by any other camber design. Our Trüe Camber varies between board models because each board is specifically designed for a certain terrain or type of riding, for example the Trüe Camber in our Pantera has a larger height for maximum response, while the Trüe Camber in our freestyle boards are lower to provide you with a more freestyle friendly flex, without losing the support and trust you need for stomping landings. Camber is Camber there is no point in over complicating it!

Construction:
Koroyd Powercore: The latest in core technology, utilizing co-extruded miniature tubes, vertically aligned and welded, with unique energy absorption properties, KoroydTM is approximately 70% lighter than standard balsa wood, with no loss in strength or flex. This engineered core is utilized in the tip and tail areas of the HIGHLANDER, DOPPLEGÄNGER and VICTORIA models for a smoother ride, and reduced swing mass and overall weight.
Diamond Laminates: Well-balanced layers of carbon fiber establish a new level in performance. More snap and liveliness provide a smooth, powerful and effortless ride.
Sintered Speed Formula II Base: Rocket science put to work! A nanotech wax formula deeply infused into our sintered base material makes the base surface lightning fast in all snow conditions. Highly tuned yet extremely durable, SPEED FORMULA II Base technology is exclusively featured on Nitro high-end boards.
Reflex Core Profile: A thinner core profile between your feet improves handling and increases torsional flex, allowing you to steer your board through a turn with ease.
Wax: All NITRO boards are factory-tuned with Kandahars 100% Natural Speed Wax, a fully Bio-degradable wax made of renewable resources.

Sustainability:
- Certified CO2 Neutral Life Cycle
- Water-based incs for over 70% of all topsheets
- Wood from responsible sources (FSC certified)
- All edges are made of 50% recycled steel
- Over 85% of all running bases are made using recycled raw material
- The board factory is powered 100% by solar power

Specifications:
- Hole System: 2x4
- CORE: Powerlite Core
- BASE: Sintered Speed Formula II Base
- SHAPE: Directional + Progressive Sidecut
- Setback: -15mm
- Profile: Trüe Camber
- FLEX: Mountain 7/10
- Sidecut: 8.3/7.3m
- Length: 152cm
- Running Length: 1140mm
- Waist Width: 242mm
- Recommended weight: 45-65 kg